Skip to main content

Your Source For Everything Point-Of-Purchase!

Delta Slot Style Flexible Hang Tabs, 2" x 2", Attaches to Packaging for Merchandising on Hooks and Clip Strips, Made in USA, ETP-10

(No reviews yet) Write a Review

Per Unit Price :

$0.0505
Minimum Order Amount:
$25.2500
SKU:
ETP-10
Minimum Purchase:
500 units
  • QTY PRICE
  • 500+ $0.0505
  • 1000+ $0.0476
  • 5000+ $0.0421
  • 10000+ $0.0386
  • 50000+ $0.0304
Sold in increments of 500
Adding to cart… The item has been added
  • "Delta" or aka "SLOT"style hole on this hang tab fits on single and double prong,
     (or butterfly width) peg hooks.
  • These hang tags can be used to merchandise on Clip Strip® Merchandisers and Peg Hooks.
  • The self-adhesive area on the "Flexible" hang tabs, allows for the hang tab to be placed on uneven surfaces.
  • Made of Crystal Clear PVC
  • Clear adhesive area: 2.0" W x 1.25" H.
  • Hang Hole is 1.312" Wide.
  • 10 hang tabs per pad. 50 pads per pack.
  • 5,000 hang tabs per master carton.
  • Product weight bearing maximum: 10 ounces
  • O.D. 2" W x 2" H.
  • This Hang Tab is "Made in the USA"

TO KEEP THE ADHESIVE IN PRIME, WORKING CONDITION: Please store the HANG TABS in sealed boxes, leaving the adhesive unexposed with the paper liner attached, and out of direct light. We recommend storage of our adhesive based hang tabs in a temperature environment of 59° to 82° Fahrenheit (15°- 28° Celsius) with humidity between 20% - 60%. In perfect conditions, shelf life has exceeded 4 to 5 years, but as a general rule, we recommend using them within two years from purchase date. As general rule, if these recommendations above are not followed, the shelf life and ability of your adhesive on these products to function properly may decrease.

Rest assured, Clip Strip Corp. has multiple and comprehensive quality control checks on all the materials we use, in the production of our hang-tabs. We have incoming inspection testing, testing at the beginning of production runs, and additional testing on demand. Having stated this, it is still very important that our customers be aware that the adhesives used for our hang tabs, need to bond with a clean, dry, and contaminant free high-energy surface. One way to check for a high-energy surface is to test the dyne level. We recommend bonding with a surface that has a dyne level of 38 or higher.

If you would like more information on Types and Uses of Hang Tabs, click here.

Clip Strip Corp. carries an extensive line-up of product merchandising hang tabs to suit all your needs. As far as testing to ensure that the tab will work for your in-store needs, either send us your product in its packaging so we can test or log onto our website and request Free Samples.

Not sure how to proceed? When you need a real solution, ask the experts at Clip Strip Corp. Our Advice Is Always Friendly And Free!