Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK
Point of Purchase Retail Store Fixtures, merchandising displays, sign holders and frames, hang tabs, display peg hooks, ceiling hanging, display construction and much more...

Categories

History of the Clip Strip® Video History of the Clip Strip® Video

Delta Style Flexible Hang Tab, ETP-10

Write a review
Price: $0.0675
ETP-10
In stock
$33.7500
Our Quantity Discounts (Call for Large Qty Pricing):
Quantity 500+ 5000+ 10000+
Price $0.0675 $0.0629 $0.0505

Minimum quantity for "Delta Style Flexible Hang Tab, ETP-10" is 500.

  • "Delta" style hole on this hang tab fits on single and double prong, (or butterfly width) peg hooks.
  • These hang tabs can be used on Clip Strip® Merchandiser hooks
  • The adhesive area on the "Flexible" hang tabs, allows for the hang tab to be placed on uneven surfaces
  • Made of Crystal Clear 15 mil eco-friendly 100% recycled rPETG
  • Clear adhesive area: 2" W x 1.25" H
  • Hang Hole is 1.312" Wide
  • 10 hang tabs per pad. 50 pads per pack
  • 5,000 hang tabs per master carton
  • Product weight bearing maximum: 10 ounces
  • O.D. 2" W x 2" H

TO KEEP THE ADHESIVE IN PRIME, WORKING CONDITION: Please store the HANG TABS in sealed boxes, leaving the adhesive unexposed with the paper liner attached, and out of direct light. We recommend storage of our adhesive based hang tabs in a temperature environment of 59° to 82° Fahrenheit (15°- 28° Celsius) with humidity between 20% - 60%. In perfect conditions, shelf life has exceeded 4 to 5 years, but as a general rule, we recommend using them within 2 years from purchase date. As general rule, if these recommendations above are not followed, the shelf life and ability of your adhesive on these products to function properly may decrease.

Rest assured, Clip Strip Corp. has multiple & comprehensive quality control checks on the materials we use.  We have incoming inspection testing, testing at the beginning of production runs, and additional testing on demand.  Having stated this, it is still very important that our end customers understand that our adhesives need to bond with a clean, dry, and contaminant free high-energy surface.  One way to check for a high-energy surface is to test the dyne level.  We recommend bonding with a surface that has a dyne level of 38 or higher.

If you would like more information on our Types & Uses of hang tabs, click here!

Need tips on how to hand apply your Hang Tabs, please check out our Quick Guide on hand application best practices here.

Not sure how to proceed? When you need a real solution, ask the experts at Clip Strip Corp. Our Advice Is Always Friendly And Free!

No reviews found